E-katalog skupiny BLOCK®
/
TECHNICAL DATA
| Suspended ceiling type |
|---|
| Modular ceiling system |
| Dimension | |
|---|---|
| value | dimension |
| Standard dimensions | 665 x 1360 |
| Standard dimensions | 665 x 1190 |
| Atypical dimension | XXXxXXX |
| In this section, the basic panel dimension is selected. Max. 725x1420 mm, min. 200x200 mm. | |
| Panel design |
|---|
| Standard panel, thickness 1.2mm |
| Sandwich panel |
| Atypical design |
| In this section, you can choose between two basic types of panels. Single-layer panel or sandwich panel with mineral wool filler 100kg/m3 |
| Panel type |
|---|
| 1 x Light fixture 625x625 |
| 2 x Light fixture 625x625 |
| 1 x Purofil |
| 2 x Purofil |
| Hole for Purofil and light fixture (625) |
| Panel with a service hole |
| Panel with a atypical hole |
| Atypical |
| In this section, the panel type is selected. Either the \"O\" option for standard without fitting, or for fitting the complementary components. All items are for both sandwich and single-layer panels. |
| Panel hole dimensions |
|---|
| Atypical hole size |
| Atypical hole diameter |
| Without a hole |
| Atypical - multiple holes in the panel |
| In this section, atypical hole in the panel is selected. |
| Distance of the atypical hole from the panel edge |
|---|
| Without a atypical hole |
| Length values in X (horizontal) and Y (vertical) axes determine the centre of the panel hole from the panel edge (always the bottom left corner) |
| In this section, a distance of the hole from the panel edge is chosen for an atypical panel. |
| Hue of standard panels - normally on the visible side |
|---|
| Galvanized metal sheet, hue RAL 9016 |
| Stainless steel AISI 304 |
| Powder coating (Komaxit), hue RAL |
| In this section, material and hue of the panels is selected for the bottom visible side. Standard is RAL 9016 powder coating. |
| Hue of standard panels - normally on the top side |
|---|
| Galvanized steel sheet, hue RAL 9015 |
| Powder coating (Komaxit), hue RAL |
| Galvanized steel sheet |
| In this section, the surface finish of the top walking side is selected. Galvanizing is considered standard. |
| Atypical design |
|---|
| Type design |
| Atypical design |
| Type design 0 - Unique specification out of offered versions Atypical design Q - atypical design that cannot be uniquely specified by a code |