E-katalog skupiny BLOCK®
Wash trough 215.05
 |
- The wash trough was specially developed primarily for pre-operative rooms. It meets the stringent requirements for equipment designed for clean areas.
- The trough is equipped with sensor-operated mixers. It is made of AISI 304 stainless steel.
- It is available in the standard widths of 800, 1500, 1850, 2100 and 2400 mm. The wash trough is mounted on a 50 mm high profile. The total post-installation height of the rear wall of the trough is 1400 mm. The trough is situated at a height of 850 mm.
| Size selection: | |
| Width A (mm) | 800; 1500; 1850; 2100; 2400 |
| Depth (mm) | 500 |
| Height (mm) | 900 |
| Total height ofv rear panel (mm) | 1400 |
|
|
| Description: S - Servis open Z - Basic profil height 50 mm |
TECHNICAL DATA
| Type designation |
|---|
| Wash trough |
| Trough width | |
|---|---|
| value | width |
| Trough width. One sensor-operated mixer | 800 mm |
| Trough width. Two sensor-operated mixers | 1500 mm |
| Trough width. Two sensor-operated mixers | 1850 mm |
| Trough width. Two sensor-operated mixers | 2100 mm |
| Trough width. Three sensor-operated mixers | 2100 mm |
| Trough width. Three sensor-operated mixers | 2400 mm |
| Variation of basic profile design |
|---|
| Stainless steel basic profil |
| the basic profile is covered with flooring |
| the basic profile is varnished RAL |
| Atypical design |
|---|
| Type design |
| Atypical design |
| Type design 0 - Unique specification out of offered versions Atypical design Q - atypical design that cannot be uniquely specified by a code |
