E-katalog skupiny BLOCK®
Media panel of type LSK 206.01
 |
 |
- Laboratory table is designed for safe work with chemicals, gases and laboratory instruments.
- A media panel of type LSK consists of lower and upper installation panel.
- The upper installation panel can be installed independently from the bottom one.
- Upper installation panel consists of lateral metal posts and metal removable cartridges.
- Between the posts of the upper installation panel can be added a shelf and / or lighting.
- Media installed into a medium panel are selectable. The enlargement is recommended to consult with the seller.
- Media can be brought from the floor or ceiling. If the supply brought from the ceiling, to the system must be added chimney for achieving of the covering of distribution.
- Basic exchange cartridge is full (3). It may be replaced by a cartridge for electrical outputs (1) or cartridge for the media (2). In compliance with safety standards
- Electrical socket (1). Max.6 electrical sockets in a single cartridge
- Data socket. It is recommended one data socket in a single cartrige or data socket combined with electrical sockets
- Outputs for the media (2). Maximum number of media in a cartridge - 3 pieces
- Load capacity of shelf 25 kg
 |
 |
Note: Electrical cartrige can not be placed under the media outlets
Variants of implementation
|
Dimension series |
[ mm ] |
|
The length of the table |
1200,1500, 1650, 1800,2400 |
|
One sided table: |
750 (600+150), |
|
Double sided table: |
1350 (600+150+600), 1500 (675+150+675) 1650 (750+150+750) |
|
The height of working surface |
900 (for standing operators), |
|
Overall height with a top media panel |
1700 (900+800) |
Optional accessories
- sockets 230V, 400V with the main switch
- socket for PC
- media and water outlets
- eye shower
- vertical bars for the placement of apparatuses
- lighting
Sample of set:
|
|
1 - Media panel, chapter 206.01
2 - Worktop, chapter 205.01
3 - Electrical installations, chapter 207.03
4 - Liquid and gaseous media outlets, chapter 207.03
5 - Cabinet for table assembly, chpter 204.02
6 - Covering to the floor, chapter 204.04
7 - Worktop, chapter 205.01
8 - Sink cabinet, chapter 204.01
9 - Covering to the floor, chapter 204.04
10 - Safety shower, chapter 207.04
TECHNICAL DATA
| Type designation |
|---|
| Media panel of type LSK |
| Combination of installation panels |
|---|
| Upper installation panel |
| Both instalation panels |
| Width | |
|---|---|
| width | value |
| 1200 mm | Panel width |
| 1500 mm | Panel width |
| 1650 mm | Panel width |
| 1800 mm | Panel width |
| 2400 mm | Panel width* |
| 2400 mm | Panel width** |
| * A media panel with a center partition. ** A media panel with a central pillar. | |
| The height of the bottom panel (working surface) | |
|---|---|
| height | value |
| 750 mm | The height of the bottom panel (working surface.) |
| 900 mm | The height of the bottom panel (working surface.) |
| The height of the lower installation panel is dependent on the height of the working surface. Therefore, it must be the same as the desired height of the working surface. | |
| Variants of design |
|---|
| Assembling of the table with media panel creates a one-sided table |
| Assembling of the table with media panel creates an islet table |
| Accessories - supply of media |
|---|
| Supply of media from the ceiling. The supply panel is appended to the assembly |
| Supply from the floor. The assembly in the basic version |
| Accessories - Lighting |
|---|
| Lighting is not required |
| Lighting is part of the assembly |
| Accessories - shelves |
|---|
| Shelves are not a part of the assembly. |
| The part of assembly is the glass shelf with aluminum frame |
| The part of assembly is the laminate shelf |
| The part of assembly is the shelf made from TRESPA material |
