E-katalog skupiny BLOCK®
SINK CABINET 216.08/A
 |
- Completes the range of facilities for personnel and material pass-through.
- Sink cabinets are available in two designs
- door design
- design suited for optional step-over bench
 |
|
Sink cabinet for pass-through |
 |
|
Sink cabinet for pass-through, suited for optional step-over bench |
TECHNICAL DATA
| Type designation |
|---|
| Sink cabinet |
| Material design | |
|---|---|
| value | Material |
| Standard | |
| Standard plus | |
| Premium 304 | |
| Type design | |
|---|---|
| height | value |
| 900 mm | Sink cabinet |
| 900 mm | Sink cabinet with a bench fitted from the left |
| 900 mm | Sink cabinet with a bench fitted from the right |
| The indicated height includes the basic profile with a height of 50 mm. | |
| Door swing direction |
|---|
| Two-door cabinet |
| Left door |
| Right door |
| Width | |
|---|---|
| width | value |
| 600 mm | Cabinet width |
| 700 mm | Cabinet width |
| 800 mm | Cabinet width |
| 900 mm | Cabinet width |
| Cabinet depth | |
|---|---|
| value | depth |
| Depth | 400 mm |
| Depth | 450 mm |
| Depth | 500 mm |
| The ground plan dimension of the cabinet is indicated without the worktop. With the worktop installed, the depth is larger by 20 mm. | |
| Plinth 50 mm |
|---|
| Basic profile covered with floor covering. For new floor covering |
| Metal profile with surface finish. For the existing floor covering |
| Colour finish of the cabinet |
|---|
| White colour |
| Non-standard - optional colour finish |
| Worktop |
|---|
| Stainless steel AISI 304 |
| Postforming |
| Sink type |
|---|
| Stainless steel sink AISI 304, diameter 400 mm ** |
| Stainless steel sink AISI 304, dimensions 400x340x200 mm |
| Stainless steel sink AISI 304, dimensions 330x235x180 mm * |
| Stainless steel sink AISI 304, dimensions 290x340x180 mm * |
| Stainless steel sink AISI 304, dimensions 400x290x200 mm * |
| Stainless steel sink AISI 304, dimensions 400x400x200 mm |
| Stainless steel sink AISI 304, dimensions 250x370x150 mm ** |
| * sinks intended for stainless steel worktops ** sinks intended for post-forming worktops |
| Sink position in the worktop |
|---|
| The sink is located at the left of the cabinet |
| The sink is located at the right of the cabinet |
| The sink is located at the centre of the cabinet |
| Mixer-tap type |
|---|
| Wall-mounted mixer tap |
| Upright single-lever mixer |
| Upright single-lever mixer with pull-out spout |
| Upright sensor-controlled mixer |
| Mixer tap position |
|---|
| The mixer tap located left of the sink |
| The mixer tap located right of the sink |
| No hole for the mixer tap in the worktop |
| Worktop area |
|---|
| Smooth worktop * |
| Worktop with offset and a rear rim, height 30 mm |
| Worktop with offset |
| Smooth worktop with a rear rim, height 30 mm |
| * for postforming worktop |
| Worktop colour design |
|---|
| Stainless steel worktop - SB surface |
| Postforming worktop, white colour |
| Postforming worktop, grey colour |
| Postforming worktop, abstract colour |
| Non-standard design |
|---|
| Standard design |
| Non-standard solution |
| Standard design 0 - clear specification out of offered options Non-standard design Q - atypical solution that cannot be clearly specified using a code |