Choose language

E-katalog skupiny BLOCK®

Revolving door-I 104.01/I


 Together with the casing, this metal revolving door represents one of the basic elements to construct clean workplaces and areas with maximum safety, sterility, hygiene, easy maintenance and sanitation.

PRODUCT DESCRIPTION

Facing

  • The facing of the door leaf consists of a molded tile produced by precision molding.
  • Reinforcements are glued-in along the perimeter of the facing, in order to increase the rigidity of the door leaf.
  • Reinforcement and filler are glued together under pressure.

Door wing

  • The door leaf is solid or glazed with the PHARMA system, offering double-sided glazing where the glass pane is in plane with the surface of the door leaf.
  • It is possible to install blinds in the space between the glass panels.

Casing

  • Mounting into the partition.
  • Casing is in line with partition.
dveře2.jpg

1)  Casing
2)  Self closer
3)  Door wing
4)  Glazing
5)  Hardware
6)  Cylindrical insert
7)  Hinges
8)  Retractable treshold


9)  Active wing
10) Passive wing

ADVANTAGES

  • Magnetic locks - tongue extends until closing and no damage to casing  the paint.

TECHNICAL DATA

Door type
basic hinged door I

Swing direction
single wing left
single wing right
double wing
double wing
atypical
Atypical design - Double-leaf door with above-standard control of the fixed leaf
In the case of a different hue of the casing, the hinge is automatically of the same hue as the casing.
Atypical finish - the customer requires a different hue than the casing - according to RAL colour standard.
Up to a door width of 1200 mm and a height of 2200 mm, the door is fitted with two hinges as standard.

Door dimensions
700x2100
900x2100
1100x2100
1300x2100 mm (active wing width 900mm)
1500x2100 mm (active wing width 900mm)
1700x2100 mm (active wing width 900mm)
In the case of an atypical active door wing, it is necessary to specify the dimensions of the active wing as part of the code. For example 1800/900/x2010 (clear width 1800, active wing 900, passive wing 900).

Grounding for zone I and II
Earthing for zone I and II
Earthing has not been done

Glazing size
solid door without glazing
glazing 1/3
glazing 1/2
maximum glazed
hinge side 2/3 mirror 400x1450 mm
2/3 mirror on opposite side of hinges 400x1450 mm
atypical
Glazing is always placed in the center (axis) of the door with dimensions depending on the width of the leaf
* double-leaf doors are glazed safety glass laminated with a thickness of 6mm active wing only. The glazing of the passive wing is an atypical design.
In an atypical version, it is possible to adjust the glazing according to the customer's request, but always consultation with FC staff is necessary
For glazing, it is also possible to use an internal window film to create the desired look, a suitable pattern can be selected from the Windows Films sample book.

Blinds type
without blinds
magnetic blinds on side of hinges
magnetic blinds on opposite side of hinges
atypical
Standard hue of blinds S156 (silver) according to the manufacturer's sample book, custom hues according to RAL colour standard.

Type of door control
automatic operator
manual
door closer
atypical

Hardware
handle
fixed doorknob
elbow switch (S10-E)
one-point panic exit push device
operable doorknob
stainless steel plug
not included in delivery
atypical
sensor switch (clean switch)
button (S10-E)
I. Hardware - on the side of hinges
II. Hardware - on the opposite side of the hinges

Cylindrical insert
openings for lock and insert have not been cut out
standard cylindrical insert
not included in delivery
atypical
For S7-E it is always C0 - the opening is not cut out.

Drop seal
Dropseal ELLEN MATIC 2K
without strip
atypical
Protective bumper, kick plate - dimensions and finish must be specified in the notes to the door order.

Casing mounting
finish for partition panels 52mm
finish for partition panels 60mm
finish for partition panels 100mm
finish for a plasterboard wall (HSE)
Cladding frame for double partition 100 mm
Cladding frame for double partition 140 mm
finish for Surgical
finish to modular partition
atypical

Using an additional column
without column
column on the left
column on the right

Indication - type
without indication
Indication - type YDG
Indication - type Block

Indication - location
Without indication
with indication on the right on side without hinges SP-OZ
with indication on the right on side of hinges SP-PZ
with indication on the left on side without hinges SL-OZ
with indication on the left on side of hinges SL-PZ
with double-sided indication on the left SP-O/P
with double-sided indication on the right SP-O/P
atypical

Door wing blocker
without el. blocker
electromechanical solenoid lock ST-DB 100
electomagnetic lock
atypical

Facing hue and material
Galvanized metal sheet, hue RAL 9016
Stainless steel AISI 304
Powder coating (Komaxit), hue RAL
RAL anti-bacterial varnish
atypical design
In the case of different door wing facings, it is necessary to specify the hue as atypical, and to provide more details in the notes.

Casing hue and material
Galvanized metal sheet, powder coating (Komaxit), hue RAL 9016
Stainless steel AISI 304
Galvanized metal sheet, powder coating (Komaxit), hue RAL
RAL anti-bacterial varnish

Atypical design
Type design
Atypical design
Type design
0 - Unique specification out of offered versions
Atypical design
Q - atypical design that cannot be uniquely specified by a code