E-katalog skupiny BLOCK®
Door with increased thermal resistance 06/D
Together with the casing, partition panels and ceiling panels with increased thermal resistance, this door with increased thermal resistance is another component for the construction of cold storage rooms and thermochambers.
The door is of the sandwich type, consisting of facing and inner filler Styrofoam IB. They are always made as rebated doors, thickness 62, 82, 102 or 122 mm.
Door thickness depends on the thickness of the used panel (the door is always aligned with the partition).
Doors and casings have minimum heat transfers and no thermal bridges.
TECHNICAL DATA
| Door type |
|---|
| door with increased thermal resistance |
| Swing direction |
|---|
| left |
| right |
| Finish |
|---|
| single wing |
| Door dimensions |
|---|
| W; H; clear width x clear height |
| Door thickness |
|---|
| 102 mm |
| 122 mm |
| 62 mm |
| 82 mm |
| Hinge type |
|---|
| Atypical |
| Dr. Hahn |
| Standard hue RAL 9016 matt - standard casing. In the case of a different hue of the casing, the hinge is automatically of the same hue as the casing. |
| Glazing |
|---|
| usual thermo glazing 320x1050 |
| solid without glazing |
| atypical |
| BT - Glazing with thermal resistance λ=1 W.m-1.K-1 is used as standard.With atypical design, it is also possible to modify the glazing parameters according to customer's requirements - always subject to consultation with FC staff. |
| I. Hardware - on the side of hinges | |
|---|---|
| value | colour |
| type Lina-R | nerez |
| handle | |
| fixed doorknob | |
| not included in delivery | |
| atypical | |
| II. Hardware - on the opposite side of hinges | |
|---|---|
| value | colour |
| type Lina-R | nerez |
| handle | |
| fixed doorknob | |
| not included in delivery | |
| atypical | |
| Cylindrical insert |
|---|
| without cylindrical insertopening is sealed with a stainless steel plug |
| standard cylindrical insert |
| not included in delivery |
| atypical |
| Drop seal |
|---|
| without strip |
| atypical |
| dropseal |
| Type of door control |
|---|
| atypical |
| manual |
| door closer DORMA TS 73 |
| Protective bumper, kick plate - dimensions and finish must be specified in the notes. |
| Facing hue and material |
|---|
| galvanized metal sheet, hue RAL 1015 |
| galvanized metal sheet, hue RAL 6027 |
| galvanized metal sheet, hue RAL 9002 |
| galvanized metal sheet, hue RAL 9016 |
| Stainless steel AISI 304 FIN 8 |
| Powder coating (Komaxit), hue RAL |
| In the case of different door wing facings, it is necessary to specify the hue as atypical, and to provide more details in the notes. (Example: 9016/6027.) I Position - finish on the side of hinges: metal sheet RAL 9016 II Position - finish on the opposite side of hinges: metal sheet RAL 6027 |
| Casing hue and material |
|---|
| galvanized metal sheet, hue RAL 1015 |
| galvanized metal sheet, hue RAL 6027 |
| galvanized metal sheet, hue RAL 9002 |
| galvanized metal sheet, hue RAL 9016 |
| Stainless steel AISI 304 FIN 8 |
| powder coating (Komaxit), hue RAL |
| Atypical design |
|---|
| type design |
| atypical design |
| Type design 0 - Unique specification out of offered versions Atypical design Q - atypical design that cannot be uniquely specified by a code |