E-katalog skupiny BLOCK®
Basic partition panels 102.01/C
Basic partition panels represent one of the basic elements to construct clean workplaces and areas with maximum safety, sterility, hygiene, easy maintenance and sanitation.
Their design is suitable especially for hospital environments, areas in pharmaceutical industry, electrotechnical industry, mechanical engineering industry, food industry, and chemical industry.
Due to the tight connection between the partition panels, spaces created between the panels, the floor and the ceiling are guaranteed to contain overpressure or underpressure in the room, which means that they meet the basic criteria for clean areas, for which these panels were specifically designed and proven.
TECHNICAL DATA
| Panel type |
|---|
| basic partition panel |
| Panel thickness |
|---|
| 100 mm |
| 120 mm |
| 32 mm |
| 52 mm |
| 60 mm |
| 80 mm |
| 32 mm |
| 60 mm |
| 80 mm |
| Panel width W |
|---|
| 1190 mm |
| 560 mm |
| The project allows the use of atypical panels with the dimension of min. 300 mm and max. 1190 mm. |
| Panel height H |
|---|
| 2550 mm |
| 2750 mm |
| 3050 mm |
| Height according to standard dimensional range 2550, 2750, 3050 mm. Preferred dimensions 2550, 2750, 3050 mm. Min. dimension 300 mm, max. dimension 4000 mm. |
| Side end |
|---|
| groove - tongue |
| tongue - tongue |
| groove - straight |
| straight - straight |
| visible HVAC - visible HVAC (max. dimension 1150 mm) |
| visible - tongue(max. dimension 1150 mm) |
| visible - groove (max. dimension 1150 mm) |
| visible HVAC - groove (max. dimension 1150 mm) |
| groove - visible HVAC (max. dimension 1150 mm) |
| inclined 45° - inclined 45° |
| groove - groove |
| straight - tongue |
| visible HVAC - tongue (max. dimension 1150 mm) |
| tongue - visible HVAC (max. dimension 1150 mm) |
| visible - groove (max. dimension 1150 mm) |
| Bottom end |
|---|
| basic (tongue) |
| basic+reinforcement |
| clasic (straight) |
| clasic+reinforcement |
| groove |
| atypical |
| Upper end |
|---|
| basic (tongue) |
| basic with reinforcement (tongue) |
| clasic (straight) |
| groove |
| no upper bend (high panels) |
| atypical |
| Side reinforcement |
|---|
| simple reinforcement |
| no side reinforcement |
| right reinforcement, left reinforcement |
| reinforced reinforcement |
| For right and left reinforcement, it is necessary to keep the orientation according to the diagram of the side ends. |
| Number of cable glands |
|---|
| no cable gland |
| 2 pcs (1 pc 85 mm from the left- 1 pc 85 mm from the right) |
| cable glands from the left, cable glands from the right |
| Filler |
|---|
| Mineral wool |
| PSE - foam polystyrene |
| Atypical |
| Bordered openings |
|---|
| with trimming and with inner U-profile Galvanized |
| without trimming |
| without trimming with inner U-profile, RAL, AISI |
| Atypical |
| Opening |
|---|
| opening 300x400 |
| no opening |
| Facing hue and material - standard on the visible side |
|---|
| Galvanized metal sheet, hue RAL 1015 |
| Galvanized metal sheet, hue RAL 6027 |
| Galvanized metal sheet, hue RAL 9002 |
| Galvanized metal sheet, hue RAL 9016 |
| Stainless steel AISI 304 FIN 8 |
| Aluminum sheet, hue RAL |
| Powder coating (Komaxit), hue RAL |
| Facing hue and material - standard on the rear side |
|---|
| Galvanized metal sheet, hue RAL 1015 |
| Galvanized metal sheet, hue RAL 6027 |
| Galvanized metal sheet, hue RAL 9002 |
| Galvanized metal sheet, hue RAL 9016 |
| Stainless steel AISI 304 FIN 8 |
| Aluminum sheet, hue RAL |
| Powder coating (Komaxit), hue RAL |
| Atypical design |
|---|
| Type design |
| Atypical design |
| Type design 0 - Unique specification out of offered versions Atypical design Q - atypical design that cannot be uniquely specified by a code |
| structural opening dimensions; width x height (mm) | surface weight |
|---|---|
| 12x22 mm | 10 kg/m2 |