E-katalog skupiny BLOCK®
Revolving door 01/FN Brno
Together with the casing, this metal revolving door represents one of the basic elements to construct clean workplaces and areas with maximum safety, sterility, hygiene, easy maintenance and sanitation.
The facing of the door leaf consists of a molded tile produced by precision molding. Reinforcements are glued-in along the perimeter of the facing, in order to increase the rigidity of the door leaf, the mounting of the hinge and the lock. Facing, reinforcement and filler are glued together under pressure.
The door leaf is solid or glazed with the PHARMA system, offering double-sided glazing where the glass pane is in plane with the surface of the door leaf. It is possible to install blinds in the space between the glass panes.
TECHNICAL DATA
| Door type |
|---|
| basic hinged door |
| Swing direction |
|---|
| left |
| right |
| Finish |
|---|
| single wing |
| double wing |
| double-wing with extra control of the fixed wing |
| Door dimensions |
|---|
| 1100x2010 |
| 1300 /700/ x 2010 |
| 1500 /900/ x 2010 |
| 1700 /1100/ x 2010 |
| 700x2010 |
| 900x2010 |
| In the case of an atypical active door wing, it is necessary to specify the dimensions of the active wing as part of the code. For example 1800/900/x2010 (clear width 1800, active wing 900, passive wing 900). |
| Door thickness |
|---|
| 52 mm |
| Grounding for zone I and II |
|---|
| Earthing has not been done |
| Earthing for zone I and II |
| Hinge type | ||
|---|---|---|
| value | detailed description | colour |
| For Clean | Nerezový pant s teflonovou vložkou | AISI 304 |
| Dr. Hahn | Hliníkový pant s teflonovou vložkou | RAL (standartně RAL 9016 mat) |
| In the case of a different hue of the casing, the hinge is automatically of the same hue as the casing. Atypical finish - the customer requires a different hue than the casing - according to RAL colour standard. | ||
| Glazing size |
|---|
| glazing 1/3 |
| glazing 1/2 |
| glazing 2/3 |
| usual glazing 320x1050 |
| solid door without glazing |
| Glazing glass type | |
|---|---|
| value | detailed description |
| laminated safety glass, thickness 6 mm | |
| milk float glass, thickness 4 mm | |
| float glass, thickness 4 mm | |
| mirror glazing 2/3 on side of hinge | reflexní |
| mirror glazing on opposite side of hinge | reflexní |
| Blinds type | ||
|---|---|---|
| detailed description | colour | value |
| dle vzorníku | magnetic blinds | |
| Provedení S 156. | dle vzorníku RAL | mechanical blinds |
| without blinds | ||
| Standard hue of blinds S156 (silver) according to the manufacturer's sample book, custom hues according to RAL colour standard. | ||
| Blinds location |
|---|
| on side of hinges |
| on opposite side of hinges |
| HVAC grille | |
|---|---|
| value | colour |
| without HVAC grille | |
| grille 800x500 | dle dveřního křídla |
| grille 300x400 | dle dveřního křídla |
| grille 300x300 | dle dveřního křídla |
| Standard colour finish is the colour of the door wing. | |
| Type of door control | ||
|---|---|---|
| value | detailed description | colour |
| automatic operator | Trido ISO | Přírodní elox |
| manual | ||
| door closer | DORMA TS 83 | dle dveřního křídla |
| I. Hardware - on the side of hinges | ||
|---|---|---|
| detailed description | colour | value |
| měď | ||
| měď | ||
| LINA-R | nerez | handle |
| LINA-R | nerez | fixed doorknob |
| Montáž do výšky vypínačů | černá | elbow switch (S10-E) |
| FAB. Dotykové panikové kování 900000 (910000) | RAL | panic exit touch device |
| FAB. Tlačné panikové kování jednobodové 890100 | RAL | one-point panic exit push device |
| FAB. Tlačné panikové kování tříbodové 890000 | RAL | three-point panic exit push device |
| Montáž nad dveřní křídlo | černá | radar (S10-E) |
| Bezdotykový snímač | bílá | sensor switch (S10-E) |
| ABB tango | bílá | button (S10-E) |
| LINA-R | nerez | operable doorknob |
| LINA-R | nerez | stainless steel plug |
| not included in delivery | ||
| II. Hardware - on the opposite side of hinges |
|---|
| handle |
| not included in delivery |
| fixed doorknob |
| elbow switch (S10-E) |
| panic exit touch device |
| one-point panic exit push device |
| three-point panic exit push device |
| radar (S10-E) |
| sensor switch (S10-E) |
| button (S10-E) |
| operable doorknob |
| stainless steel plug |
| Cylindrical insert | ||
|---|---|---|
| value | detailed description | colour |
| openings for lock and insert have not been cut out | ||
| standard cylindrical insert | insert 35/35 | nickel-plated |
| not included in delivery | ||
| For S10-E it is always C0 - the opening is not cut out. | ||
| Drop seal | ||
|---|---|---|
| value | detailed description | colour |
| without strip | ||
| Dropseal ELLEN MATIC 2K | Rubber sealing(max. extension 10-12 mm) | Natural anodizing |
| Protective bumper, kick plate - dimensions and finish must be specified in the notes to the door order. | ||
| Casing mounting | |
|---|---|
| value | detailed description |
| finish for a plasterboard wall | SDK výrobce HSE. Šířka ostění (mm) - 75; 100; 125; 250 |
| finish for partition panels | šířka ostění (mm) - 60; 80; 100; 120 |
| finish for Surgical | |
| Casing thickness |
|---|
| 100 mm |
| 120 mm |
| 60 mm |
| 80 mm |
| in the case using of the additional 25 mm column, it is necessary using of notes: 1 - additional column on the hinge side 2 - additional column on the opposite side of the hinges |
| Indication | |
|---|---|
| detailed description | value |
| Integrovaná v zárubni | Without indication |
| Integrovaná v zárubni | with indication on the right on side without hinges SP-OZ |
| Integrovaná v zárubni | with indication on the right on side of hinges SP-PZ |
| Integrovaná v zárubni | with indication on the left on side without hinges SL-OZ |
| Integrovaná v zárubni | with indication on the left on side of hinges SL-PZ |
| Integrovaná v zárubni | with double-sided indication on the left SP-O/P |
| Integrovaná v zárubni | with double-sided indication on the right SP-O/P |
| Door wing blocker | |
|---|---|
| value | detailed description |
| without el. blocker | |
| by electromagnet | Montáž elektromagnetů na povrch dveří. |
| electromechanical solenoid lock ST-DB 100 | zámek ST-DB 100. Pod napětím 24V uzavřen. |
| Facing hue and material |
|---|
| Galvanized metal sheet, hue RAL 1015 |
| Galvanized metal sheet, hue RAL 6027 |
| Galvanized metal sheet, hue RAL 9002 |
| Galvanized metal sheet, hue RAL 9016 |
| Stainless steel AISI 304 FIN 8 |
| Powder coating (Komaxit), hue RAL |
| In the case of different door wing facings, it is necessary to specify the hue as atypical, and to provide more details in the notes. |
| Casing hue and material |
|---|
| Galvanized metal sheet, hue RAL 1015 |
| Galvanized metal sheet, hue RAL 6027 |
| Galvanized metal sheet, hue RAL 9002 |
| Galvanized metal sheet, hue RAL 9016 |
| Stainless steel AISI 304 |
| Powder coating (Komaxit), hue RAL |
| Another hue must be specified in the notes. |