E-katalog skupiny BLOCK®
PUROFIL filtration adapters 01/D
PUROFIL filtration adapters are intended as an end filtration element in the air distribution system for environments with high demands for the purity of incoming air - such as operating theatres, sterilisation rooms, intensive care units, different areas in pharmaceutical industry, electrical engineering industry, mechanical engineering industry, food industry, etc.
Adapters are produced in several dimensions of facing, according to HEPA filter size.
To distribute incoming air, the adapters are fitted with a swirling vent-grille or a perforated element at the bottom.
TECHNICAL DATA
| Product type |
|---|
| filtration adapter PUROFIL |
| A - old system (until 06/2005) B - old system (until 06/2009) C - new snap-on system - compatible with the innovated lightweight metal suspended ceiling and light fixtures (since 06/2009) D - new designation (since 05/2013) |
| Standard suspended ceiling dimensions |
|---|
| ceiling grid dimensions 600x600 |
| ceiling grid dimensions 625x625, preferred |
| Standard dimensions |
|---|
| lightweight metal suspended ceiling FOR CLEAN |
| pass-through cabin (for opening size 390x390 and panel thickness 52mm) |
| metal ceiling panel |
| Thermatex |
| Filter dimensions |
|---|
| filter dimensions 305x305x117 |
| filter dimensions 305x305x78 |
| filter dimensions 457x457x117 |
| filter dimensions 457x457x78 |
| filter dimensions 570x570x117 (cannot be used in grid 600) |
| Air intake |
|---|
| side with round neck |
| side with rectangular neck, must be with transition |
| upper with round neck |
| Size of inlet neck |
|---|
| rectangular neck 120x265, for transition Ø200 |
| rectangular neck 120x417, for transition Ø250 |
| rectangular neck 145x530, for transition Ø315 |
| rectangular neck 80x265, for transition Ø160 |
| rectangular neck 80x417, for transition Ø200 |
| rectangular neck 95x530, for transition Ø250 |
| round neck diameter 160 |
| round neck diameter 200 |
| round neck diameter 250 |
| round neck diameter 315 |
| Damper |
|---|
| without damper |
| damper |
| Transition piece |
|---|
| without accessories |
| one-sided HVAC transition piece |
| Surface of lower structure |
|---|
| stainless steel AISI 304 FIN 8 |
| thermosetting powder coat Komaxit, standard hue RAL 1015 |
| thermosetting powder coat Komaxit, standard hue RAL 6027 |
| thermosetting powder coat Komaxit, standard hue RAL 9002 |
| thermosetting powder coat Komaxit, standard hue RAL 9016 |
| Exhaust element |
|---|
| DLQ diffuser |
| perforated metal sheet with a free surface of ~30% |
| innovated single-row swirling element - size to be determined by the designer according to flow in the HVAC system - suitable for all flows |
| Frame to cover cut-out openings |
|---|
| without frame |
| frame |
| Surface of exhaust element |
|---|
| stainless steel AISI 304 FIN 8 (cannot be used for section S7 Output element for item AN) |
| thermosetting powder coat Komaxit, standard hue RAL 1015 |
| thermosetting powder coat Komaxit, standard hue RAL 6027 |
| thermosetting powder coat Komaxit, standard hue RAL 9002 |
| thermosetting powder coat Komaxit, standard hue RAL 9016 |
| Filtration class |
|---|
| filtration class H13 |
| filtration class H14 |
| Height of filtration medium |
|---|
| 1’’ medium |
| 2’’ medium |
| 3’’ medium |
| 4’’ medium |