E-katalog skupiny BLOCK®
Double partition 102.12/A
The double partition has been developed mainly for the partition in auxiliary rooms of the surgical wing (patient prep room, recovery rooms, physician washing room, sterilisation room, etc.) in the Surgical system.
The basic thickness of the double-sided partition is 145 mm (the diameter of the waste pipe inside the partition is 50 mm) or 170 mm (the diameter of the waste pipe inside the partition is 75 mm).
The double partition is encased in cladding panels with plasterboard fillers. These panels are installed on vertical C-section of the grid with buffer L-sections.
TECHNICAL DATA
| Panel type |
|---|
| Cladding panel with a plasterboard filler |
| Anchoring method |
|---|
| Plasterboard panel only |
| Panel with auxiliary anchoring and reinforcing sections (supporting frame) |
| Panel with a guide profile, glued directly onto the wall (the panel is glued directly to the wall) |
| Panel width W |
|---|
| 1190 mm |
| 560 mm |
| xxxx mm |
| The required dimension can be requested as an atypical product. panel min. dimension 300 mm max. dimension 1190 mm |
| Panel height H |
|---|
| 2550 mm |
| 3000 mm |
| max. dimension 3000mm |
| Side end |
|---|
| groove - tongue (LEft-hand design) |
| tongue - groove (RiIGHT-hand design) |
| Facing share material |
|---|
| galvanized metal sheet RAL 9016 |
| Stainless steel AISI 304, FIN8 |
| Povder coating (Komaxit) RAL shade |
| Atypical design |
|---|
| Type design |
| Atypical design |
| Type design 0 - Unique specification out of offered versions Atypical design Q - atypical design that cannot be uniquely specified by a code |