E-katalog skupiny BLOCK®
Worktops for sink tables 05/A
 |
 |
1 - Sink cabinet, chapter 204.04
2 - Worktop for sink cabinets and basins, chapter 202.11
3 - Covering to the floor, chapter 204.03
4 - Mixers, chapter 203.11
5 - Safety shower, chapter 203.13
- Cabinet with sink, or sink cabinet, is designed for rinsing and washing laboratory glassware and equipment.
- It is recommended to provide sink cabinet worktops with a raised edge in order to prevent spillage of liquids (ČSN EN 13 0150).
- Worktops are available in a wide variety of materials, which allows to select the most suitable material for your laboratory. The worktops are fitted with sinks. Sinks may be fitted from the top or from the underside.
- This depends on the capabilities of the worktop material and the selected sink. Preferably, the sink should be fitted from the underside of the worktop.
Table of chemical resistance at 20 °C:
|
|
|
 |
- Long-term resistant |
 |
- Short-term resistant |
 |
- Non-resistant |
NOTE:
The table of material properties is for guidance only. If you have any doubt, we will be happy to advise you.
Dimensional range
Worktop width: 600, 900 mm
Worktop depth: 600, 750, 800, 900 and 1500 mm
Selecting sinks, drip sinks and basins.
Drip sinks:
 |
 |
|
PP120 - 120x120/120 mm
|
PP295 - 295x120/150 mm
|
|
|
|
K145 - 145x145/230 mm |
K295 - 295x145/230 mm |
Sinks and basins:
 |
 |
|
N4V01 - 450x380/160 mm AISI 304 |
N4V02 - 760x480/160 mm AISI 304 |
 |
|
|
N4V03 - 760x435/150 mm AISI 304 |
N6V01 - 450x450/250 mm AISI 316 |
|
 |
|
PP467 - 467x467/350 mm |
K455 - 455x455/265 mm |
|
 |
|
K595 - 595x455/265 mm |
K895 - 895x455/265 mm |
 |
 |
|
D464 - 464x464/190 mm |
D667 - 667x464/203 mm |
TECHNICAL DATA
| Type designation |
|---|
| Type designation of worktops for sink cabinets |
| Worktop material |
|---|
| AISI 304 stainless steel |
| Tile 150x150 mm |
| AISI 316 stainless steel |
| Tile 200x200 mm |
| Tile 400x800 mm |
| Epoxy resin (DURCON) |
| High-pressure laminate |
| Technical ceramics |
| Pressed laminated board |
| Postforming |
| Polypropylene |
| Safety glass |
| Artificial stone |
| Raised edge |
|---|
| With a raised edge |
| Without a raised edge |
| Worktop width | |
|---|---|
| width | value |
| 600 mm | Worktop width |
| 900 mm | Worktop width |
| Worktop depth | |
|---|---|
| value | depth |
| Worktop depth | 600 mm |
| Worktop depth | 750 mm |
| Worktop depth | 900 mm |
| Worktop depth | 1500 mm |
| Sink position |
|---|
| Sink positioned on the left |
| Sink positioned on the right |
| Two centred sinks. For table depth of 1500 mm |
| One sink at the centre for table depths of 600, 750, 900 and 1500 mm |
| Dual sink positioned at the centre |
| Sink 1 |
|---|
| Epoxy sink 464x464x190 mm |
| Epoxy sink 667x464x203 mm |
| Ceramic drip sink 145x145x230 mm |
| Ceramic drip sink 295x145x230 mm |
| Ceramic sink 455x455x265 mm |
| Ceramic sink 595x455x265 mm |
| Dual ceramic sink 895x455x265 mm |
| AISI 304 stainless steel sink 450x380x160 |
| AISI 304 stainless steel dual sink 760x480x160 |
| AISI 304 stainless steel sink with drip tray 760x435x150 |
| AISI 316 stainless steel sink 450x450x250 mm |
| Polypropylene drip sink 120x120x120 mm |
| Polypropylene drip sink 295x120x150 mm |
| Polypropylene sink 467x467x350 mm |
| Sink 2 |
|---|
| Epoxy sink 667x464x203 mm |
| Ceramic drip sink 145x145x230 mm |
| Ceramic drip sink 295x145x230 mm |
| Ceramic sink 455x455x265 mm |
| Ceramic sink 595x455x265 mm |
| Dual ceramic sink 895x455x265 mm |
| Without a second sink |
| AISI 304 stainless steel sink 450x380x160 mm |
| AISI 304 stainless steel dual sink 760x480x160 mm |
| AISI 304 stainless steel sink with drip tray 760x435x150 mm |
| AISI 316 stainless steel sink 450x450x250 mm |
| Polypropylene drip sink 120x120x120 mm |
| Polypropylene drip sink 295x120x150 mm |
| Polypropylene sink 467x467x350 mm |
| Epoxy sink 464x464x190 mm |
| Eye shower |
|---|
| The eye shower is positioned to the left of the mixer. |
| Without eye shower |
| The eye shower is positioned to the right of the mixer. |